Certificate of Compliance
December 10, 2023
Part Number: 55-00096
Description: Tool, assembly connector, max connector OD 5.5 mm, ABS
RoHS
This is to certify that all articles listed above are compliant with all requirements and exemptions of the Directive (EU) 2015/863, and do not contain above the specified limits on any of the following banned substances:
- Lead (Pb): 0.1%
- Mercury (Hg): 0.1%
- Polybrominated Biphenyls (PBB): 0.1%
- Hexavalent Chromium (Cr6+): 0.1%
- Cadmium (Cd): 0.01%
- Polybrominated Diphenylethers (PBDE): 0.1%
- Bis(2-Ethylhexyl) phthalate (DEHP): 0.1%
- Benzyl butyl phthalate (BBP): 0.1%
- Dibutyl phthalate (DBP): 0.1%
- Diisobutyl phthalate (DIBP): 0.1%
- Mercury (Hg): 0.1%
- Polybrominated Biphenyls (PBB): 0.1%
- Hexavalent Chromium (Cr6+): 0.1%
- Cadmium (Cd): 0.01%
- Polybrominated Diphenylethers (PBDE): 0.1%
- Bis(2-Ethylhexyl) phthalate (DEHP): 0.1%
- Benzyl butyl phthalate (BBP): 0.1%
- Dibutyl phthalate (DBP): 0.1%
- Diisobutyl phthalate (DIBP): 0.1%
Note: Products containing copper alloy (brass) connectors may contain up to 4% lead by weight. These components meet compliance through exemption 6(c) of Annex III. See below EU Waste Framework Directive (WFD) for article components with this exemption.
REACH (SVHC 235)
Tensility International Corporation certifies the above listed articles are fully compliant with the requirements of European Union Regulation (EC) 1907/2006 concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH).
Under REACH regulations – Article 7, Tensility International Corporation is considered a provider of "articles." All of our products are assemblies/components, not raw materials. None of our products intentionally release substances into the environment.
Tensility does not manufacture, use, or place on the market any substances, mixtures, and articles restricted under REACH Annex XVII, updated July 27, 2023.
EU Waste Framework Directive (WFD) and SCIP Database
Article components containing SVHCs
Proposition 65 – California Safe Drinking Water and Toxic Enforcement Act
This document certifies the above listed products do not contain any chemical substances listed by the State of California on its Proposition 65 (“Safe Drinking Water and Toxic Enforcement Act of 1986”).
EPA’s Toxic Substance Control Act Declaration
Tensility is committed to complying with all applicable requirements of the Toxic Substances Control Act (TSCA), including the reporting requirements for perfluoroalkyl or polyfluoroalkyl substances (PFAS) under TSCA Section 8(a)(7). Tensility has also evaluated its products to determine if they contain any of the persistent, bioaccumulative, and toxic (PBT) chemicals listed by the EPA under TSCA. Tensility has confirmed that none of the listed PBT chemicals are present in its products.
Asbestos Free Product Declaration
This document serves as a declaration and confirmation that asbestos materials are not utilized in any assembly, sub-assembly, or component of the products listed above. No asbestos is used at any time during the manufacturing and construction of our products unless otherwise stated.
Declaration of PFAS
The product(s) listed above have been assessed for the presence of PFAS, and it has been determined that they do not contain any PFAS compounds that are restricted under Annex XIV (the Authorization List) or Annex XVII (Restriction List) of the EU REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC) No. 1907/2006.
Sincerely,
Luis Alcala
Tensility International Corporation
541-323-3228