Certificate of Compliance
June 04, 2023
Part Number: 053-0275R
Description: Cable, 1830 mm, 2.5 mm 50-00132 mono plug to stripped tinned, 24 AWG, 30-00005 wire, shielded
This is to certify that all articles listed above are compliant with all requirements and exemptions of the Directive (EU) 2015/863, and do not contain above the specified limits on any of the following banned substances:
- Mercury (Hg): 0.1%
- Polybrominated Biphenyls (PBB): 0.1%
- Hexavalent Chromium (Cr6+): 0.1%
- Cadmium (Cd): 0.01%
- Polybrominated Diphenylethers (PBDE): 0.1%
- Bis(2-Ethylhexyl) phthalate (DEHP): 0.1%
- Benzyl butyl phthalate (BBP): 0.1%
- Dibutyl phthalate (DBP): 0.1%
- Diisobutyl phthalate (DIBP): 0.1%
Note: Products containing copper alloy (brass) connectors may contain up to 4% lead by weight. These components meet compliance through exemption 6(c) of Annex III. See below EU Waste Framework Directive (WFD) for article components with this exemption.
REACH (SVHC 233)
Tensility International Corporation certifies the above listed articles are fully compliant with the requirements of European Union Regulation (EC) 1907/2006 concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH).
Under REACH regulations – Article 7, Tensility International Corporation is considered a provider of "articles." All of our products are assemblies/components, not raw materials. None of our products intentionally release substances into the environment.
Unless listed below, Tensility confirms our products do not contain any substances of very high concern (SVHC) above the specified limit, as updated January 17, 2023.
Tensility confirms the above listed article does not contain any substances of very high concern (SVHC) above the specified limit, as updated January 17, 2023.
Tensility does not manufacture, use, or place on the market any substances, mixtures, and articles restricted under REACH Annex XVII, updated January 5, 2023.
Note: Copper alloy connectors may contain Lead (CAS No. 7439-92-1) in concentrations up to 4% by weight. According to ANNEX XVII Entry 63, paragraph 8(k)(iv), such articles fall within the scope of Directive 2011/65/EU and are excluded from REACH SVHC restrictions.
EU Waste Framework Directive (WFD) and SCIP Database
Article components containing SVHCsPart Number: 50-00132
Proposition 65 – California Safe Drinking Water and Toxic Enforcement Act
WARNING: This product can expose you to chemicals including Vinyl Chloride, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
EPA’s Toxic Substance Control Act Declaration
Tensility hereby certifies that all our products comply with the United States Toxic Substances Control Act (TSCA) PBT substances regulation to the best of our knowledge, based on information received from our suppliers. None of our products contain any of the 73 PBT substances listed by the TSCA, including Decabromodiphenyl ethers (DecaBDE), Hexachlorobutadiene (HCBD), Hexachlorocyclohexanes (HCH), Pentachlorophenol (PCP) and its salts, Phenol, isopropylated, phosphate (3:1), and 2,4,6-Tris(tert-butyl)phenol (2,4,6-TTBP).
Asbestos Free Product Declaration
This document serves as a declaration and confirmation that asbestos materials are not utilized in any assembly, sub-assembly, or component of the products listed above. No asbestos is used at any time during the manufacturing and construction of our products unless otherwise stated.
This document serves as a declaration and confirmation that the above referenced product is free from any PER- and Polyfluoroalkyl Substances (PFAS). The product(s) listed above have been assessed for the presence of PFAS, and it has been determined that they do not contain any PFAS compounds that are restricted under Annex XIV (the Authorization List) or Annex XVII (Restriction List) of the EU REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC) No. 1907/2006.
Tensility International Corporation